Saltar al contenido
Pegar imágenes en el foro, mediante equipos móviles ×

Tornamesas


hectori

Recommended Posts

Q

Amplificador a tubos Sanei 45/2a3 + Full Range Fostex FE208EZ 8" BLH + Horn Tactrix con Jbl Driver + Cambridge CXN2

Enlace al comentario
Compartir en otros sitios

e-flat-yosegi-4.jpg

e-flat-yosegi-1.jpg

e-flat-yosegi-3.jpg

Esta es la Yosegi E-FLAT con brazo Plano.

EAT’s E-Flat is a new, forward-thinking turntable supplied with a revolutionary flat tonearm. Although flat arms have been seen in the past, none have been able to offer the rigidity necessary to deliver the stable performance expected of modern tonearms. Thanks to the continued evolution of carbon fibre, Forte has been able to create an arm with the practical and aesthetic benefits of a flat form, but without the weaknesses.

E-Flat’s mission is to bring to the music lover the highest quality performance, but in a user-friendly design. Ultra-flat, ultra-light and ultra-rigid, the E-Flat tonearm measures 10in long. A unipivot bearing supports the E-Flat, its fully (and easily) adjustable counterweight decoupled by energy- and vibration-absorbing Sorbothane. The E-Flat’s unipivot system is extremely precise and accurately balanced, thanks to components endowed with especially hard metal surfaces. Unwanted motion often attributed to lesser unipivot designs is eliminated by the high mass of unipivot housing and the added security of two metal guides.

A further valuable benefit is that its carbon-fibre arm “tube” can be changed by the user to address to specific cartridge requirements, with either lighter or heavier tubes to establish different arm/cartridge resonant frequencies. Adjustable anti-skating and a damped cueing lever are also fitted.

A flat arm tube opens up a number of possibilities for the designer – and the listener. Its shape encourages the design of a flatter platter with easier, visible arm levelling, and there is no taper to accommodate. With perfect integration to the unipivot design pillar, no hollow tube to suffer the inevitable echo effects or ringing, greater stiffness, a new and superior hanging counterweight design with very high damping properties, the E-Flat tonearm’s performance is truly quiet and incredibly “fast.”

This handsome and innovative arm is fitted to a turntable that adheres to the basic principles established by the existing models in the Forte family. A belt-drive design, it features two motors, like its ‘bigger sisters’. The two motors do not run in parallel, but act like a virtual 24-pole motor. The belt encircles an inner sub-platter, which is fitted with inside bearing made out of bronze bushings. The main platter rests on an inverted bearing and a ceramic ball, with a Teflon lining on the underside of the main platter.

As with the larger Forte record decks, the diameter of the platter is oversized compared to those on most competitors’ turntables. 33cm was chosen because the moving mass is twice that of a standard 30cm platter. Forte fits a vinyl mat made of recycled LP records to create a surface with properties sympathetic to the LPs it supports. The platter is filled underneath with Sorbothane to stop resonance, while Sorbothane is also used to damp the bearing housing, tonearm base and magnetic feet. In addition to the isolation provided by the magnetic feet, the bearing assembly and platter aperture are suspended. Also in common with the dearer Forte turntables, the Forte E-Flat exhibits an ideal balance between mass-loading and thoughtful subchassis design.

  • Upvote 1
Enlace al comentario
Compartir en otros sitios

hace 19 horas, Giuseppe55 dijo:

 Y  esta belleza..................Thorens TD 145 MKII

 

cf9c3087a1d52926fdcb88072812254b.jpg

5180e98a95f3803e302bbff07890cb3e.jpg

Nada que envidiarle a esta Td150 que está en venta ahora mismo...

Enlace al comentario
Compartir en otros sitios

hace 29 minutos, hectori dijo:

5180e98a95f3803e302bbff07890cb3e.jpg

Nada que envidiarle a esta Td150 que está en venta ahora mismo...

El Mk.II tiene un brazo  Isotrack Tp-16Mk.II más nuevo que la TD145

Enlace al comentario
Compartir en otros sitios

  • 1 month later...

En este canal de YT siempre aparecen cosas interesantes cono esta Sharp RP-117. 

 

  • Upvote 1
  • Tri Amp: Bajos: 2x ICEpower 125ASX2 mono 1.000W > Medios: Infineon Audamp24 GaN SINGLE-ENDED +Pre Nutube B1 by Nelson Pass>AMP Agudos: Infineon  IRAUDAMP21 Mosfet
  • Drivers OB Híbrido:  Bajos: DA RSS265hf-4 10" > Medios: SEAS A26RE4 10" > Agudos: Heil AMT ESS Large.
  • Otros: Crossover Activo RANE AC23  XO Digital Dbx Driverack Pa2 > DSP SONARWORKS >  DAC Gustard x16 MQA> > Chromecast Audio > NUC >TT DENON + NAGAOKA MP101+ PJ S 
  • AMP Audifonos: Burson Soloist SL MK2 >  Sennheiser 6xx >Fidelio X2HR
Enlace al comentario
Compartir en otros sitios

hace 2 horas, hectori dijo:

La puta que lo parió :o

Conrad Johnson MV75 A1 Premium Grade Modified; Jensen G-600 Triax; Electro Tech Symphonie Preamp + MM; Eureka Model 1 MC Phono Stage; Musical Fidelity Digilog (IPA Grade Mod) + TDA1541A S2 Double Crown; Revox B225 TDA1540 x2 Precison Low Jitter Clock, Non Oversampling Conversion, IV Stage Upgraded (IPA Grade Mods); Teac Z7000 Master Deck (IPA Grade).

Enlace al comentario
Compartir en otros sitios

Que el módulo del motor esté separado del módulo del plato no me parece complejo, pero que lo esté el del brazo! Pienso en la dificultad en mantener la calibración de manera estable. Tornamesas para zonas asísmicas.

Habrá que tener un segundo protractor para posicionar los módulos sobre el rack.

No olvidar: menos es más

Editado por tomate
  • Upvote 1
Enlace al comentario
Compartir en otros sitios

  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...

Le pediré a mi sra que me haga esta TT, es algo más real de poder tener, que alguna de las que se publican acá :lol:

tocadiscos-con-caja-de-musica.jpg

Editado por Mr_oD
  • Upvote 2
  • Tri Amp: Bajos: 2x ICEpower 125ASX2 mono 1.000W > Medios: Infineon Audamp24 GaN SINGLE-ENDED +Pre Nutube B1 by Nelson Pass>AMP Agudos: Infineon  IRAUDAMP21 Mosfet
  • Drivers OB Híbrido:  Bajos: DA RSS265hf-4 10" > Medios: SEAS A26RE4 10" > Agudos: Heil AMT ESS Large.
  • Otros: Crossover Activo RANE AC23  XO Digital Dbx Driverack Pa2 > DSP SONARWORKS >  DAC Gustard x16 MQA> > Chromecast Audio > NUC >TT DENON + NAGAOKA MP101+ PJ S 
  • AMP Audifonos: Burson Soloist SL MK2 >  Sennheiser 6xx >Fidelio X2HR
Enlace al comentario
Compartir en otros sitios

  • 2 weeks later...
  • 3 months later...
  • 1 month later...

Aterrizando el voyerismo vinílico...   por esas cosas del destino...  llegaron dos a mi salita de audio...  Revox B790...

 

Revox B790.JPG

  • Upvote 1
Enlace al comentario
Compartir en otros sitios

e-flat-yosegi-4.jpg

e-flat-yosegi-1.jpg

e-flat-yosegi-3.jpg

Esta es la Yosegi E-FLAT con brazo Plano.

EAT’s E-Flat is a new, forward-thinking turntable supplied with a revolutionary flat tonearm. Although flat arms have been seen in the past, none have been able to offer the rigidity necessary to deliver the stable performance expected of modern tonearms. Thanks to the continued evolution of carbon fibre, Forte has been able to create an arm with the practical and aesthetic benefits of a flat form, but without the weaknesses.

E-Flat’s mission is to bring to the music lover the highest quality performance, but in a user-friendly design. Ultra-flat, ultra-light and ultra-rigid, the E-Flat tonearm measures 10in long. A unipivot bearing supports the E-Flat, its fully (and easily) adjustable counterweight decoupled by energy- and vibration-absorbing Sorbothane. The E-Flat’s unipivot system is extremely precise and accurately balanced, thanks to components endowed with especially hard metal surfaces. Unwanted motion often attributed to lesser unipivot designs is eliminated by the high mass of unipivot housing and the added security of two metal guides.

A further valuable benefit is that its carbon-fibre arm “tube” can be changed by the user to address to specific cartridge requirements, with either lighter or heavier tubes to establish different arm/cartridge resonant frequencies. Adjustable anti-skating and a damped cueing lever are also fitted.

A flat arm tube opens up a number of possibilities for the designer – and the listener. Its shape encourages the design of a flatter platter with easier, visible arm levelling, and there is no taper to accommodate. With perfect integration to the unipivot design pillar, no hollow tube to suffer the inevitable echo effects or ringing, greater stiffness, a new and superior hanging counterweight design with very high damping properties, the E-Flat tonearm’s performance is truly quiet and incredibly “fast.”

This handsome and innovative arm is fitted to a turntable that adheres to the basic principles established by the existing models in the Forte family. A belt-drive design, it features two motors, like its ‘bigger sisters’. The two motors do not run in parallel, but act like a virtual 24-pole motor. The belt encircles an inner sub-platter, which is fitted with inside bearing made out of bronze bushings. The main platter rests on an inverted bearing and a ceramic ball, with a Teflon lining on the underside of the main platter.

As with the larger Forte record decks, the diameter of the platter is oversized compared to those on most competitors’ turntables. 33cm was chosen because the moving mass is twice that of a standard 30cm platter. Forte fits a vinyl mat made of recycled LP records to create a surface with properties sympathetic to the LPs it supports. The platter is filled underneath with Sorbothane to stop resonance, while Sorbothane is also used to damp the bearing housing, tonearm base and magnetic feet. In addition to the isolation provided by the magnetic feet, the bearing assembly and platter aperture are suspended. Also in common with the dearer Forte turntables, the Forte E-Flat exhibits an ideal balance between mass-loading and thoughtful subchassis design.

Csm, brazos intercambiables de carbono planos, holy shiy

Enviado desde mi POCOPHONE F1 mediante Tapatalk

Enlace al comentario
Compartir en otros sitios

On 1/5/2018 at 16:49, ChristianSur dijo:

Roksan Radius 5.2

 

WD-Roksan-Radius52.jpg

Puta que me arrepiento no haber comprado una de estas, las últimas estuvieron de oferta muy baratas (sin brazo). Traía montura compatible para brazos Rega 😭

 

 

Enlace al comentario
Compartir en otros sitios

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Invitado
Responder en este tema...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Crear Nuevo...