Jump to content

RodrigoStereo

Miembros
  • Content Count

    77
  • Joined

  • Last visited

Community Reputation

14 Good

About RodrigoStereo

  • Rank
    Oportunista

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Puede ser aca https://antenas-cruz-tv-hd-fm.negocio.site/ tambien puede ser : https://teleequipo.cl/busqueda?controller=search&s=antena+exterior+fm&order=product.position.desc
  2. same here with my TD 166, occasionally i find a record won't fit on, only takes a second to fix with my handy specialist adjustment tool: a screwdriver i had knocking about on the desk Zer0beaT member Posts: 74 Joined: 16 Jul 2008 06:00 Location: C/A/N/A/D/A What's a good way to widen a records center hole? Post by Zer0beaT » 27 Jul 2009 05:36 Every once in a while I acquire an LP whose center hole is super tight. I can always get them ON my player, but getting them off isn't always easy. The majority of them ease up after several times putting them on and taking them off. I was thinking about using a drill-bit with the exact circumference of the tables spindle and gently widening the hole by hand on the few LPs that are really bad, just enough for a slightly-snug fit. Can anyone tell me the standard hole size so I can find the appropriate drill bit? What do you guys do in this scenario, btw? Top fftulip member Posts: 73 Joined: 21 Dec 2008 06:46 Location: Southern California Post by fftulip » 27 Jul 2009 08:53 I ran into that problem just a couple of days ago. The standard for a 12" record hole seems to be 7.24mm -0 +0.09mm or 0.285 to 0.289 inch. I just acquired a Classic Records reissue of an RCA Shaded Dog and its hole diameter was almost exactly 0.285mm, just on the borderline of being too small. I made the mistake of forcing it onto one of my turntables that happens to have a large spindle and almost couldn't get it off! I fixed the problem by using a tapered reamer on the record spindle. Very lightly spin the reamer from each side and check the fit or measure with calipers until it's close to 7.33mm/0.289 inch. You can get a tapered reamer at any hardware or tool store. Second best tool would be a round file. Top jdclock member Posts: 38 Joined: 04 Feb 2009 23:55 Location: pennsylvania widen hole Post by jdclock » 28 Jul 2009 04:02 I have an AR/XA and the spindle measures .285 or 7.239mm. I seem to have the most difficulty with 1970' & 80's EMI label. A few are a REAL struggle to get on and off. I bought a 7.2mm drill bit and keep it handy...just a light twist through the record hole does the trick. Top capkurt6 junior member Posts: 16 Joined: 20 Jul 2009 00:32 Location: utica, michigan Post by capkurt6 » 28 Jul 2009 04:13 a reamer that is NOT tapered, would be the best bet. reamers leave a very fine hole, but a tapered reamer will leave you with pretty much just a chamfer. They are availible at various industrial outlets like msc, production tool supply, etc. let me know if you need help finding them. Top pbda member Posts: 34 Joined: 25 Jun 2004 17:39 Location: London, England Post by pbda » 29 Jul 2009 16:20 I use a pencil and have never been disappointed with the result! :) Top busoni junior member Posts: 15 Joined: 19 Feb 2008 12:26 Location: Greece Post by busoni » 01 Aug 2009 01:00 Ι use a round file very carefully, filing a little and then trying to put the record again on the spindle. A good idea, though I haven't tried it, would be to file the tight record hole against a record with a normal hole. Ofcourse, a spare record would better do the job of the normal-hole-record. Top Paul Clarke member Posts: 141 Joined: 22 Jan 2008 21:19 Location: Cambridge, England Post by Paul Clarke » 03 Aug 2009 13:18 I'm with pbda. A pen or a pencil and a bit of a wiggle has always done the trick for me. Top riche_guy member Posts: 232 Joined: 18 Sep 2006 03:25 Location: Montreal Post by riche_guy » 04 Aug 2009 10:55 What ever you use, do it by hand and lightly. It doesn't take very much to just get it wide enough to slip down the spindle. Top Greg M member Posts: 51 Joined: 07 Jul 2009 01:13 Location: Washington, US Post by Greg M » 05 Aug 2009 02:28 Spend the money and get an non tapered reamer. You can get any size you want for $20 or less Top natejames19 Posts: 2 Joined: 29 Apr 2020 01:03 Re: What's a good way to widen a records center hole? Post by natejames19 » 29 Apr 2020 01:06 A round file will do the trick neatly in seconds. They are available at hardware stores for $5-10. Top JDJX long player Posts: 4481 Joined: 28 Nov 2013 20:17 Location: Mid Hudson valley..... NY.....In the orginal Orange County Re: What's a good way to widen a records center hole? Post by JDJX » 29 Apr 2020 02:15 Even a small roll sandpaper that will fit in the LP hole ...with the grit is on the outside will do. Two or three of twists with it is usually sufficient. The roll will tend to want to unwind when in the hole and give just the right amount of pressure against the vinyl . This is what I do to enlarge a tight LP hole. There is no need to over complicate a simple thing like this. :) Top lenjack long player Posts: 3434 Joined: 23 Jun 2017 02:11 Location: Liverpool, PA Re: What's a good way to widen a records center hole? Post by lenjack » 29 Apr 2020 20:05 Standard is 0.2812 inches or 7.143mm. AR was one of the few that adhered to this, in order to prevent wow from slightly off center records.
  3. Hola Xtian espero que estes bien y con salud , sobre el eje o espiga o como se le pueda llamar hay que comentar algo en el post mencionas que compraste un vinilo o LP nuevo , resulta que ya hace un tiempo atras compre un vinilo de Led Zeppelin (oferta de el mercurio) en un kiosko de barrio el agujero del centro era de menor tamaño unos milimetros y costaba bastante colocar el disco aca en el foro ya a varias personas les a pasado la solucion es ree economica hay que ir a una ferreteria industrial y pedir una broca de 7,2 mm y 7,3 mm (en las fereterias de barrio ta van a ofrecer una de 7,0 mm) y un mango o asa para lima osea mas menos por treso cuatro lukas uno se hace una herramienta para vinilos lo que si te puedodecir que leyendo en vinilengine esta espiga cambia de espesor segun la marca de tornamesa.La otra solucion que un tornero te haga una.Bueno cuidense mucho suerte !!!! robgil long player Posts: 1398 Joined: 27 Jun 2011 02:38 Location: suffolk uk Are record player spindles all the same size? Post by robgil » 02 Aug 2012 01:25 And if they are , what size is that then ? Top Alec124c41 vinyl engineer Posts: 23691 Joined: 28 Oct 2002 03:24 Location: North of Toronto, Canada Re: Are record player spindles all the same size? Post by Alec124c41 » 02 Aug 2012 01:36 There is a standard for size. I think it is 7.2 mm. There is some variation in spindle sizes, so a record might fit easily over one, but be tight on another. Cheers, Alec Top Mark E Smith's Dentist long player Posts: 3141 Joined: 30 Dec 2003 11:32 Location: Bristol Engerland Contact: Contact Mark E Smith's Dentist Re: Are record player spindles all the same size? Post by Mark E Smith's Dentist » 02 Aug 2012 08:05 I never measured it but my Thorens TD-160 spindle was the largest I've ever lived with - it was a PITA because the deck is suspended and the suspension would bottom out before I could get certain records on. Then I had the reverse problem getting them back off! JT Top JaS engine room Posts: 11358 Joined: 12 Feb 2002 16:32 Re: Are record player spindles all the same size? Post by JaS » 02 Aug 2012 09:07 The RIAA record hole size is 0.286" (7.26mm), but as mentioned above, spindle sizes vary. From past posts I seem to remember AR as having the closest tolerance/tightest fitting spindles? Regards, JaS Top Blue Angel vinyl addict Posts: 5764 Joined: 15 Aug 2005 20:15 Re: Are record player spindles all the same size? Post by Blue Angel » 02 Aug 2012 10:38 I have measured 3 of the turntables I use: Micro MR-711 = 7.685mm Micro Seiki BL51 = 7.596mm Garrard 301 grease bearing = 7.661 Measurements were made with a Mitutoyo digital micrometer. Too late to ask for a refund on the measuring tool or the turntables? ba Top Guest Re: Are record player spindles all the same size? Post by Guest » 02 Aug 2012 11:33 In a quick check I get a range from 7.08 to 7.24 mm for spindle diameter of 6 TTs of various pedigree. Record holes are intended to be an interference fit, i think. But pretty obviously there's some variation. Top Eoin senior member Posts: 911 Joined: 27 Nov 2009 22:37 Location: Sussex Re: Are record player spindles all the same size? Post by Eoin » 02 Aug 2012 23:54 My Ariston RD80 has a large one. Needs a few tight holes slightly enlarging to work. Top mickb69 long player Posts: 1370 Joined: 19 Mar 2012 21:16 Location: Bridlington Re: Are record player spindles all the same size? Post by mickb69 » 03 Aug 2012 23:00 Mark E Smith's Dentist wrote:I never measured it but my Thorens TD-160 spindle was the largest I've ever lived with - JT same here with my TD 166, occasionally i find a record won't fit on, only takes a second to fix with my handy specialist adjustment tool: a screwdriver i had knocking about on the desk Zer0beaT member Posts: 74 Joined: 16 Jul 2008 06:00 Location: C/A/N/A/D/A What's a good way to widen a records center hole? Post by Zer0beaT » 27 Jul 2009 05:36 Every once in a while I acquire an LP whose center hole is super tight. I can always get them ON my player, but getting them off isn't always easy. The majority of them ease up after several times putting them on and taking them off. I was thinking about using a drill-bit with the exact circumference of the tables spindle and gently widening the hole by hand on the few LPs that are really bad, just enough for a slightly-snug fit. Can anyone tell me the standard hole size so I can find the appropriate drill bit? What do you guys do in this scenario, btw? Top fftulip member Posts: 73 Joined: 21 Dec 2008 06:46 Location: Southern California Post by fftulip » 27 Jul 2009 08:53 I ran into that problem just a couple of days ago. The standard for a 12" record hole seems to be 7.24mm -0 +0.09mm or 0.285 to 0.289 inch. I just acquired a Classic Records reissue of an RCA Shaded Dog and its hole diameter was almost exactly 0.285mm, just on the borderline of being too small. I made the mistake of forcing it onto one of my turntables that happens to have a large spindle and almost couldn't get it off! I fixed the problem by using a tapered reamer on the record spindle. Very lightly spin the reamer from each side and check the fit or measure with calipers until it's close to 7.33mm/0.289 inch. You can get a tapered reamer at any hardware or tool store. Second best tool would be a round file. Top jdclock member Posts: 38 Joined: 04 Feb 2009 23:55 Location: pennsylvania widen hole Post by jdclock » 28 Jul 2009 04:02 I have an AR/XA and the spindle measures .285 or 7.239mm. I seem to have the most difficulty with 1970' & 80's EMI label. A few are a REAL struggle to get on and off. I bought a 7.2mm drill bit and keep it handy...just a light twist through the record hole does the trick. Top capkurt6 junior member Posts: 16 Joined: 20 Jul 2009 00:32 Location: utica, michigan Post by capkurt6 » 28 Jul 2009 04:13 a reamer that is NOT tapered, would be the best bet. reamers leave a very fine hole, but a tapered reamer will leave you with pretty much just a chamfer. They are availible at various industrial outlets like msc, production tool supply, etc. let me know if you need help finding them. Top pbda member Posts: 34 Joined: 25 Jun 2004 17:39 Location: London, England Post by pbda » 29 Jul 2009 16:20 I use a pencil and have never been disappointed with the result! :) Top busoni junior member Posts: 15 Joined: 19 Feb 2008 12:26 Location: Greece Post by busoni » 01 Aug 2009 01:00 Ι use a round file very carefully, filing a little and then trying to put the record again on the spindle. A good idea, though I haven't tried it, would be to file the tight record hole against a record with a normal hole. Ofcourse, a spare record would better do the job of the normal-hole-record. Top Paul Clarke member Posts: 141 Joined: 22 Jan 2008 21:19 Location: Cambridge, England Post by Paul Clarke » 03 Aug 2009 13:18 I'm with pbda. A pen or a pencil and a bit of a wiggle has always done the trick for me. Top riche_guy member Posts: 232 Joined: 18 Sep 2006 03:25 Location: Montreal Post by riche_guy » 04 Aug 2009 10:55 What ever you use, do it by hand and lightly. It doesn't take very much to just get it wide enough to slip down the spindle. :D Top Greg M member Posts: 51 Joined: 07 Jul 2009 01:13 Location: Washington, US Post by Greg M » 05 Aug 2009 02:28 Spend the money and get an non tapered reamer. You can get any size you want for $20 or less Top natejames19 Posts: 2 Joined: 29 Apr 2020 01:03 Re: What's a good way to widen a records center hole? Post by natejames19 » 29 Apr 2020 01:06 A round file will do the trick neatly in seconds. They are available at hardware stores for $5-10. Top JDJX long player Posts: 4481 Joined: 28 Nov 2013 20:17 Location: Mid Hudson valley..... NY.....In the orginal Orange County Re: What's a good way to widen a records center hole? Post by JDJX » 29 Apr 2020 02:15 Even a small roll sandpaper that will fit in the LP hole ...with the grit is on the outside will do. Two or three of twists with it is usually sufficient. The roll will tend to want to unwind when in the hole and give just the right amount of pressure against the vinyl . This is what I do to enlarge a tight LP hole. There is no need to over complicate a simple thing like this. :) Top lenjack long player Posts: 3434 Joined: 23 Jun 2017 02:11 Location: Liverpool, PA Re: What's a good way to widen a records center hole? Post by lenjack » 29 Apr 2020 20:05 Standard is 0.2812 inches or 7.143mm. AR was one of the few that adhered to this, in order to prevent wow from slightly off center records.
  4. Hola !! espero que esten bien y con salud , tambien se puede usar los conectores de las tarjetas de computadora hay que desarmar el conector ver link https://www.vinylengine.com/diy-cartridge-clips.shtml
  5. Hola SG. El brazo no vuelve, efectivamente; ese plato es idéntico a un Akiyama que tuve (yo tengo la sospecha de que hay alguien fabricando estos platos todos iguales a los que luego les ponen distintas marcas) y era totalmente manual. O sea, al final del disco era levantarte y quitar la aguja tú mismo. 2) Las luces de la banda correspondiente han de estar quietas. O sea, la banda correspondiente a la velocidad seleccionada para la frecuencia de línea (50/60 Hz) correspondiente. Normalmente está indicado en el cuerpo del plato qué banda es cada una. http://www.sherwood.de/images/products/ ... 5_w960.jpg[/img] En el caso de este parece ser el dibujito que está a la izquierda, abajo, entre el interruptor circular de encendido y el botón de Start/Stop. Por cierto con respecto a este último dile que lo trate con cuidado, que mi plato era usado, seguramente por algun 'diyéi', y ese botón 2 de cada 3 veces no respondía. Un saludo. Otra persona del foro : Como ya comenté otra vez, un colega mío tiene este mismo plato pero en negro y de la marca FoneStar.
  6. Hola segun lo que encontre en www.elgramoforo.com es la copia de la copia de la copia Un colega de otro foro se dio una vuelta como invitado por éste y me ha pedido consejo para comprarse un plato. Asi que en base a lo que buscaba en un giradiscos y al presupuesto que me dió, este Sherwood me pareció una buena compra. http://www.djmania.es/tienda/sherwood-p ... 08c633268e Ya lo ha recibido y montado, ajustado contrapeso y antiskating, etc... Pero hay 2 cosas para resolver: 1) Dice que el brazo al llegar al final del disco no se levanta y vuelve a su posición inicial, la de reposo. El plato es manual, vale, pero dice que se queda el brazo al final del disco, éste girando y que el brazo no vuelve. Evidentemente esto no es normal, ha montado mal la correa? O que puede ser? 2) El estroboscopio: cuando regula el pitch, cómo sabe que la velocidad es correcta? las luces han de estar quietas? O girando en sentido contrario unas de otras? En esto no le puedo ayudar porque nunca he tenido platos con pitch o estroboscopio. Se agradecen ayudas o comentarios. Aqui la respuesta : do ayudar porque nunca he tenido platos con pitch o estroboscopio. Hola SG. El brazo no vuelve, efectivamente; ese plato es idéntico a un Akiyama que tuve (yo tengo la sospecha de que hay alguien fabricando estos platos todos iguales a los que luego les ponen distintas marcas) y era totalmente manual. O sea, al final del disco era levantarte y quitar la aguja tú mismo. 2) Las luces de la banda correspondiente han de estar quietas. O sea, la banda correspondiente a la velocidad seleccionada para la frecuencia de línea (50/60 Hz) correspondiente. Normalmente está indicado en el cuerpo del plato qué banda es cada una. http://www.sherwood.de/images/products/ ... 5_w960.jpg[/img] En el caso de este parece ser el dibujito que está a la izquierda, abajo, entre el interruptor circular de encendido y el botón de Start/Stop. Por cierto con respecto a este último dile que lo trate con cuidado, que mi plato era usado, seguramente por algun 'diyéi', y ese botón 2 de cada 3 veces no respondía. Un saludo. Otra persona del foro : Como ya comenté otra vez, un colega mío tiene este mismo plato pero en negro y de la marca FoneStar.
  7. Estimados creo que esto puede ayudar https://www.avforums.com/threads/subwoofer-fuse.815780/ Fusible T1.6AL 250V fusible rapido de 1.6 Amperes 250 Voltios. Lo que si recomiendo es llevar la muestra hay de distinto largo y lo otro sacar el equipo del rack el calor daña componentes.
  8. Creo que no ya que si miran la foto y el dibujo de arriba el que tiene un visto de aprobado no se parecen el brazo esta hacia la izquierda si miran eñ dibujo de abajo tiene una X mostrando que no esta en el lugar correcto de ahi una vez alineada la aguja/capsula dejar el brazo flotando nivelado (que la tornamesa este nivelada) y de ahi mover el contrapeso a la cantidad de gramos especifidaca por el en fabricante de la aguja/capsula.
  9. https://www.needle.cl/products/aguja-audio-technica-atn91
  10. Estimado gchiod con respecto a la aguja esta no deberia moverse te dejo un video de como cambiar la aguja empieza en (1:45 sec) tambien hay un video donde compara la Raga Carbon con la AT3600L. Tengo una torna Technics con la misma capsula y aguja At3600L como dicen en audiokarma sonido de champagne a precio de cerveza.
  11. Hola gchiod primero que nada aun tiene garantia la puedes devolver ? esta en una tornamesa hecha con material reciclado el plint, de plasticos baratos tambien reciclados las piezas interiores son bastante debiles te dejo un link con el despiece y te daras cuentas como esta construida.No gastaria tiempo en arreglarla ademas si una de las piezas de plastico se gasto es dificil encontar repuesto , habria que desarmarla y ver el engranaje del anti skate , tambien revisar la tencion dela correa o cinturon(belt).si esta se salio de posicion seria un arreglo economico pero mas alla de eso no me preocuparia.La aguja ATN3600l es muy economica mirala que no este torcida fuera de lugar , de estar mala se cambia solo la aguja no la capsula. Te recomiendo juntar dinero para una torna mejor puede ser usada, no se en que pais vives pero aca en el foro te pueden aconsejar segun lo que encuentres en venta.No todo lo antiguo fue bueno (tambien fabricaban basura) y tampoco todo lo moderno es bueno asi que ojo buscar con paciencia.La buena noticia es que se puede tirar a la basura y reciclar completamente. http://blog.thehouseofmarley.com/we-broke-apart-the-stir-it-up-turntable-into-74-pieces/ https://www.reddit.com/r/vinyl/comments/58g8a7/my_experience_with_the_house_of_marley_stir_it_up/
  12. Estimado Juan que mala suerte , animo !!! por lo menos llego el ampli , lo primero, revisar si esta para funcionar con voltaje nacional (220 v / 50 Hz), segundo aunque suene primitivo tiene olor a quemado ? tercero el cable de poder entra bien ? puedes usar uno de computador vi fotos en internet del ampli y parece que tiene el fusible adentro si estuviese con porta fusible en el chassis con el equipo apagado y desconectado de la electricidad (enchufe) sacarlo y mirar que no este cortado o quemado.Si estuviese asi quiere decir que hay corto interno. aca hay una foto de adentro del aparato
  13. Hola lo unico que seme ocurre es que preguntes aca en ingles : http://kenricksound.com/
  14. Solucion ecomica para cualquier bolsillo : https://www.vinylengine.com/diy-cartridge-clips.shtml First of all we need an old PCB with a D-Sub male connector or similar. Necesitamos un conector tipo D de una placa de PC tambien se pueden comprar en tiendas de electronica. Most (but not all of these) have gold-plated connectors. Casi todas tienen conector bañado en oro. Break the back side of the connector and extract the clips. Quiebren el lado de plastico del lado del conector para extraer en clip o conector. Make sure the connectors are rounded for better contact with the cartridge. Asegurense que el conector este redondo para que haga buen contacto. The result is as follows: In this case the clip will connect to a standard cartridge connector (1.2mm diameter pin). Clips can be crimped or soldered to the wire, making an extraordinary electrical connection because the clip fits perfectly to the pin of the cartridge. Nota : no suelden el cable con el conector puesto en la capsula (de seguro se daña) utilicen un alicate y si pueden que alguien lo afirme para soldar. This article is dedicated to all members of the Vinyl Engine, as a small contribution to the world of vinyl enthusiasts, because sound quality does not have to be confronted with expensive products. Cadrilator León (Spain)
  15. Buscando en internet este es un problema frecuente del usuario conectar a 220V el tocadiscos el cual opera a 110V les dejo una pagina en ingles pero con fotos , se puede ver la foto del tranformador en cuestion debajo de la plaquita cafe claro con los diodos (D1,D2,D3,D4) pero de todas maneras hay que revisar los diodos rectificadores (4) y el condensador no son para nada caros $$$$ , la calle Sandiego bobinan y si saben el voltaje podrian cambiarlo por uno nuevo del mismo tamaño.